Image for article titled Upholster Your Furniture With an Old Sweater

Image: joserpizarro (Shutterstock)

If you have a sweater you enjoy but no longer use, there is another way you can give it a new lifetime: Better continue to, you can give an previous piece of furnishings new lifetime, as nicely. Incorporating some texture or color to a weary piece of furnishings with this exclusive Diy is each very simple and thrifty. You can create a genuinely a person-of-a-variety piece with just a several tools by subsequent these measures.

To get startedo re-covering a chair seat, stool, or cushion, you are going to want a sweater you wouldn’t thoughts reducing up, some cloth scissors, a flathead screwdriver, a pair of pliers, a staple gun, and some upholstery lining (if the former lining is ruined or if there isn’t any).

How to get rid of outdated furnishings upholstery lining

Start off by turning your furniture piece upside down so you can see all the lining and staples or upholstery tacks. You will typically see some black or grey lining that keeps every little thing on the underside of the seat on the lookout neat. Cautiously get rid of the staples that connect the fabric, as you can reuse it when the new sweater upholstery is in position. If it is broken, get some new lining and use the old lining as a pattern to lower it to in shape. When you have gotten the lining cost-free, you can place it apart.

Clear away the previous upholstery and staples

Future acquire a seem at the edge of the aged upholstery. It will very likely be held in put with staples or upholstery tacks. Use your screwdriver and pliers to take out the staples. If the aged staples are difficult to eliminate, check out placing your flathead beneath the fabric and pulling up from beneath. Often, spreading out the drive will assistance loosen stubborn staples with no having them break and get stuck. If you do end up with staples that break and you just cannot get the parts all the way out, you can use a pair of nippers to minimize them shorter and then a nail established to hammer them flush so that they do not stab you.

Include lining, cushion, and batting

After the old material has been eradicated, get a seem at the batting and the cushion material inside of. If it is intact, you can start out re-covering your seat by chopping the upholstery lining to the exact measurement and form as the former upholstery, working with the old upholstery as a pattern. If the padding requires to be changed, you can get new foam and batting and lower it to in good shape. Make certain to take note the approximate depth of your cushion for an exact match.

Keep the foam in position the moment it is minimize, then extend the batting about leading of it, stapling a person edge alongside the bottom of your seat and then stretching it and stapling the reverse side commencing in the center and doing the job to the corners. Then staple together the other two sides, keeping the product firmly enough to pull out any wrinkles. Repeat this process with the upholstery lining, stapling it about a 50 % inch from the edge all the way around.

Attach your salvaged sweater

At the time your piece is lined and cushioned, consider your salvaged sweater content and spread it out flat. The sleeves should really be eliminated at the shoulder seams, and the cloth can then be reduce and unfold flat. Orient your sweater material in the wished-for direction to get the sample lined up and to go over your seat. Make sure the ideal facet of the sweater material is experiencing down and position your seat upside down on the material. Then, pull the back again edge up and staple it along the bottom of the seat on a single side about a 50 percent inch from the edge of the material, pulling it taught. Then pull the other aspect taught and staple from the middle out, chasing the wrinkles in the direction of the corners. Staple alongside the sides future and then at the corners, fold any winkles inwards and staple and trim alongside the edge.

Past, substitute the old (or new) lining, turning the edges below, and overlapping the edges of your upholstery product to produce a clean edge. Then, turn your piece back again in excess of and enjoy.